QuadCase Converts from Bag to Workstation in 3 Easy Steps!
Please ensure the laptop compartment is closed before proceeding to extending the legs.
1. Extend Legs
Place the QuadCase upright on a level surface with the handle facing up. Unzip the leg compartment. Extend the legs by gently pulling on the bottom most leg segment (thinnest of the four segments). It is ideal to hold the top leg segment while pulling the leg segments with the other hand.
2. Click to Desired Height
Extend leg segments until the black buttons on each segment “click” into place. Pull out as many segments as needed for the desired height. Be sure to extend all four legs to the same height.
3. Secure the Legs
Push each leg into the hinge until it clicks and feels secure. When the leg is locked into place, the leg will be slightly wider than 90° and will not move out of position unless “unlocked”. Once all legs are locked into position, turn the case and set the legs onto the ground. Adjust the legs to accommodate uneven surfaces.
Reverse steps 1 thru 3 to stow legs.
Using Your Laptop
Once the bag is upright with all legs secure, unzip the laptop compartment. Adjust the support straps to the desired height. Straps can be let out to allow case to fold open or adjusted for privacy.
Using the Mousepad
Reach into the leg storage area and pull the mousepad out and up. The mousepad will click into place when fully lifted.
Stowing the Mousepad
Reach under the QuadCase into the leg storage area and feel for the tab closest to the edge of the bag Pull the tab outward towards the mousepad and swing the mousepad under and click into place.
